Tc-helicon VoiceWorks Plus Manual Manuel d'utilisateur télécharger pdf (Page 19)

How to change the levels and pan

position of the harmony voices

In the case where one or more of the voices in a

harmony preset stand out or are too quiet, or you

would like to change pan position of each voice, you

can do the following and then store your edited preset

to the user bank.This procedure also allows you to add

or remove harmony voices to the preset.

1. In a harmony preset, press EDIT and scroll to menu

V0 with the Data Wheel. Here you’ll see how many

voices are enabled and their relative levels.

2.Adjust the voice levels with the soft knobs while you

sing. To lower the overall harmony volume for your

preset, adjust each voice by the same amount.

3.To edit pan positions, scroll to the next menu,V1, and

adjust the positions with the soft knobs. If any voices

are Off in the previous menu screen, adjusting their

pans will have no effect.

4. If you raised the level of any voice that was set to

Off, you’ll need to set the new voice’s interval in menu

V2.

How to adjust Humanization and

vibrato settings in a preset

Humanization in VoiceWorksPlus is controlled by

several settings that impose time, pitch and level

variances upon the harmony voices or to the modeled

voice to mimic human singing.You can choose to add

more of these effects or reduce them with these

menus.

In a harmony or doubling preset:

1. Press the EDIT button and scroll to menu V4 to

speed up (lower number) or slow down (higher

number), or disable (value=0) the Portamento, or glide

time between notes.

2. Scroll to menu V5 to adjust the amount of

Smoothing, which, at lower numbers acts as pitch

correction for the harmony voices.A value of 0% is full

correction and 100% yields smooth transitions

between note changes.

3. Scroll to menu H0 to choose a different

Humanization style for each voice or disable it by

setting the value to Off/No Style. Menu H1 allows you

to adjust the amount of each Style.

4. Scroll to screens H2 and H3 to change vibrato styles

and adjust the amount on each voice.

5. In menu H4 you can adjust the overall amount of

detuning to all voices with a single Det (Detune)

amount parameter and trim the three effects set by the

current Humanization style. These include Pit (Pitch

modulation, Tim (Timing variation) and Lev (Level

modulation).

Note that these values are not reset when you change

Humanization styles and if you reduce any value to

zero and then change styles you will not get the full

effect until you turn it up again.

In a modeling preset:

1. Press the EDIT button and scroll to menu L0. Here

you can choose the Humanization style you prefer and

adjust the amount in the same screen. These are the

same styles as those available for the harmony voices.

2. In menu L1, you can adjust the individual amounts of

Pitch,Time and Level randomization (Rand) set by the

current Humanization style. The leftmost soft knob

allows selection of the Pitch,Time or Level parameter

for adjustment by the next two soft knobs.

3. Editing the amount (ScpAmt), duration (Dur) and

randomization over time (Rand) of the pitch event that

occurs at the start of each sung note is set in menu L2.

These values are changed each time you load a new

Humanization style. A ScpAmt value of 0.0st (zero

semitones) disables the effect.

How to change the pitch shift in a

modeling preset

Modeling presets allow chromatic or scale-based pitch

shifting. If you have no dry voice mixed-in in menu DV,

the modeled voice, with it’s shifted pitch replaces your

voice. If your dry voice is mixed in, the modeled voice

can be used as a harmony or duet voice.

1. Load a modeling preset, press EDIT and scroll to

menu S0.

2.With the left soft knob, select which type of shifting

you prefer: Chroma (chromatic) or one of the scale

shifts from Maj1 (major 1) to Cust (custom intervals).

3.You can either adjust the chromatic shift amount in

cents (hundredths of a semitone) or set a new key,

scale and voicing interval as you would with a Scale

harmony preset only with a single modeled voice.

EDITING OVERVIEW

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Tc-helicon VoiceWorks Plus Manual Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Tc-helicon VoiceWorks Plus Manual