Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur télécharger pdf (Page 22)

First Impressions

Activating BYPASS + TUNER Mode

Press and hold the FX footswitch to remove all effects

from your voice except TONE (when active). The Tone

feature remains active in BYPASS + TUNER (Bypass) so

your voice does not sound darker when switching to

Bypass for speaking or singing with no effects.

If you have a guitar connected to the GUITAR IN, its

output will be muted in Bypass and the Tuner display will

become active so you can tune silently.

Tap the FX or any other footswitch to exit Bypass mode

and return to the previous display screen.

Changing The Mix

The effects balance in VoiceLive 2 is adjusted at the

factory to suit many situations. The Mix/Edit knobs

change the levels of :

o the combined Harmony and Doubling voices,

o the combined Delay and Reverb effects

o your guitar and its Guitar FX (as long as GUITAR

THRU jack is unused)

o the overall output level

NOTE: These adjustments are “global” meaning they

affect all presets by the same amount.

With the HOME button lit, turn any of the 4 MIX knobs.

This will present the MIX screen where you can see and

adjust these levels. After approximately 3 seconds the

display will revert back to the HOME screen.Your new

balance will remain in effect each time you power up the

unit until they are changed again.

If you want to adjust the level of a music source

connected to the AUX IN, you can do so with the AUX

LEVEL setting in the SETUP menu under the I/O tab.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 104 105

Pas de commentaire

Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur Page 22