Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur télécharger pdf (Page 54)

Overview

μMod is short for micro-modulation ("μ" is the scientific

symbol for micro).The μMod effect is capable of creating

many different sounds that range from subtle but lush

thickening to creatively destructive. It uses a combination

of stereo pitch shifting (Detune), small amounts of

stereo delay (Delay), and then a complex path of

filtering, feedback, and modulation. μMod does a faithful

job of emulating classic detune, chorus, flange and

thickening sounds.

STYLE

Use the soft knob assigned to this parameter to choose

a pre-programmed μMod style you like.

LEVEL

Sets the mix level for the μMod effect.

WIDTH

Normally, the output of the μMod effect is panned hard

left and right. This parameter sets the stereo imaging of

the μMod effect to mono (0%) and stereo (100%).

DETUNE LEFT / DETUNE RIGHT

Applies a small amount of pitch shift to the left or right

sides independently. This setting is shown in cents and

the maximum is +/- 25 cents.

SPEED

This setting sets how fast the delay time modulation

occurs. In order for this to be audible, the depth amount

parameter has to be nonzero.The setting range is 10.00

Hz (very fast) to .05 Hz (very slow).

DEPTH-L / DEPTH-R

These set the amount of modulation of the delay time

for the left and right delays. If one delay is set to 10mS,

for example, a setting of 50% will vary the delay time

between 15mS and 5mS at the rate set by the SPEED

parameter.

OUT PHASE

The OUT PHASE setting puts the output of the left and

right sides of the μMod effect out of phase to create

more 3D sound space around the effect. Note that this

may potentially limit the effect's ability to collapse to

The Edit Menu: µMOD Tab

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 104 105

Pas de commentaire

Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur Page 54