Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur télécharger pdf (Page 94)

My guitar doesn't change the harmonies.

Ensure your guitar is connected to the Guitar IN and not

the THRU.

Turn up the volume control on your guitar.

Confirm your guitar cable is good by connecting your

guitar directly to your amp.

Remove any guitar effect pedals between your guitar and

VoiceLive 2's input.

Ensure that you are playing guitar chords made up of at

least a root note and a major or minor third.

Ensure the NaturalPlay parameter in the HARMONY

Edit menu is set to Auto or Guitar.

My guitar is connected to my amp but I can't

hear it.

You may be in Tuner mode. Press the FX footswitch to

hear your guitar.

Is your Shortcut assigned to Guitar Mute? If so press the

SHORTCUT footswitch to hear your guitar.

My DELAY/REVERB MIX level is up but the

sound is still dry

Turn on the Reverb and/or Delay effects with their

respective footswitches.

If the effects are on, but you still don't hear the effect,

make sure the sends are turned up for the effects.These

parameters are located on the Reverb and Delay Edit

menus.

How do I talk to my audience with no FX on?

Hold FX footswitch to enter Bypass + Tuner mode.

I'm using the Line input and the sound is

distorted or I can't hear anything.

The LINE input shares the same input gain as the MIC

input. You can use the automatic MIC GAIN setup

procedure you used to set your Mic gain (ensure only

the LINE input is connected) or you can set the gain

manually in the I/O tab of the System menu.

FAQ and Troubleshooting

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 104 105

Pas de commentaire

Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur Page 94