Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur télécharger pdf (Page 20)

The STEP Footswitch

The Step feature allows you to create a series of up to

10 linked effect changes associated with a preset. In a

preset that has steps, for example, tapping STEP could

toggle to another preset’s effects, turn on all of the

effects at once, increase the Delay level by 6 dB or all of

the above.

Some factory presets have been programmed with

examples of steps. You can see that a preset has steps

when the COUNT (graphic) item in the HOME screen

is a number greater than 1. When you see this, you can

press the STEP footswitch to cycle through the pre-

programmed effect changes.

The STEP footswitch cycles forward through any steps

present. The PRESET (down arrow) cycles backwards

towards step 1 after which it will cycle backwards

through presets again. When the Step count is 2, the

STEP footswitch can be used toggle between the two

settings.

Programming Your Own Steps

1. Select a preset as the starting effect in your chain.

2. Hold STEP for a moment to enter Step

programming mode. Segments of the main display

will change color.

3. To insert another preset’s effect as the next step,

use the PRESET footswitches to locate the desired

preset.

4. If you want to change which effect blocks are on

press the desired effect footswitches.

5. If you want to make an edit, press the EDIT button

and make your changes. Edits made in Step insert

mode before accepting are stored automatically to

the new step.

6. Tap STEP to accept your new step and exit Step

programming mode.The COUNT legend in the

main display will increment by one and the STEP

footswitch will light.

To cancel and exit Step programming mode, hold STEP.

First Impressions

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 104 105

Pas de commentaire

Tc-helicon VoiceLive 2 User manual Manuel d'utilisateur Page 20