Tc-helicon VoiceTone Double Manuel d'utilisateur télécharger pdf (Page 14)

3. Connect Double's power adapter to main power

and to the Power Input on Double.

Standard Live Setup

The standard live setup for VoiceTone Double couldn't be

easier - put Double between your microphone and your

microphone input on your sound system. In this

configuration the Left Output produces the mixed wet and

dry mono signal.The Right Output produces your dry voice

for use with the Mono Live Sound Engineer configuration

(pg 17); it is not required for standard operation.

Configuring Standard Setup:

1. Connect your microphone to Double's Mic Input.

2. Connect the Left Output to a mic input channel on

your sound system.

Setup Configurations

The default for Double is stereo mode off (mono). If

the stereo LED is on but you prefer mono, press and

hold the two switches under the Stereo LED to

change back to mono.

NOTE:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 24 25

Pas de commentaire

Tc-helicon VoiceTone Double Manuel d'utilisateur Page 14